Canon makes a SLR camera remote timer that sells for a couple hundred dollars. Using inspiration from various web sites I built one for myself using about $15 worth of parts from RadioShack.
First, it is a simple wired camera remote control. Just plug the cable into the remote jack on the Canon SLR camera and the black button on top will trigger the camera auto focus, while the red button will focus then take a picture.
Second, it is a timer than can be used for time lapse photography. A 9-volt source (battery or DC adapter) powers a circuit I built using a 555 timer and a 6-way rotary switch where each way is hooked up to different resistors. Switching between these different resistors varies the timer interval. The timer triggers a relay switch at specified intervals which causes the camera to take pictures. It is based on the astable 555 timer circuit described here. I used the following capacitor and resistors:
- C = 3300 µF
- R1 = 1000 Ω
- R2 = 620 Ω (~5 second delay)
- R2 = 2670 Ω (~15 second delay)
- R2 = 10000 Ω (~48 second delay, I just realized I calculated this one incorrectly, as I intended for it to be 30 seconds)
- R2 = 15000 Ω (~1 minute delay)
- R2 = 65000 Ω (~5 minute delay)
- R2 = 200000 Ω (~10 minute delay)
Here are some photos of the actual device:
Okay, so the innards are a little sloppy. This was my first real electronics project. The soldering took some practice, and I actually hosed my first circuit board and had to start it over.
Here is a simple example of the sort of thing this timer allows me to do. I set it up to take a picture of a glass of ice cubes every minute for a couple of hours (i.e. until the battery in my camera ran out).
Ah, stupid YouTube! The aspect ratio is wrong, but you get the idea.
